PVDF fluorocarbon powder coating

Product Description:

The V90 product is suitable for outdoor building materials that require easy cleaning, excellent weather resistance, good edge coverage, good yellowing resistance, toughness and durability, scratch resistance, abrasion resistance, and corrosion resistance.

characteristic:

1. Excellent flowability and good coating flatness.
2. Outstanding adhesion.
3. Good corner coverage
4. Good cleanability.
5. Excellent chemical resistance, scratch resistance, abrasion resistance and corrosion resistance.
6. Apply with an electrostatic spray gun or a friction gun.

use:

Outdoor building materials such as aluminum extruded profiles, aluminum doors and windows, aluminum-zinc steel plates, aluminum curtain walls, and soundproof walls.

Usage conditions:

1. Static electricity: -60~-90 kV
2. Film thickness: 60~90μ (lower limit 50μ, upper limit 120μ)

Physical properties:

1. Color: Customized
2. Appearance: Customizable, including standard flat, hammered, and sandblasted finishes.
3. Flexural strength: φ6 mm 180°
4. Extrusion resistance: 5mm
5. Impact resistant: Will not crack under a 50cm x 500g impact on both sides.
6. Pencil hardness: H or higher
7. Adhesion: 100/100 - Does not fall off
8. Gloss (60°): Customizable, 30-98%

Curing conditions:

1. Standard hardening conditions: Bake at 200°C for 15 minutes.

Storage environment:

Places with an indoor temperature below 25°C, good ventilation and dryness, humidity below 60%, and avoid direct sunlight.
If stored under the above conditions, it can be preserved for one year.

Theoretical application:

Surface pretreatment:

Depending on the workpieces used by the client and the overall process, the surface pretreatment methods and processes will vary. It is recommended to adopt the information and conditions provided by the pretreatment chemical supplier to properly treat surface dirt, oil stains, and film treatment.

Packaging specifications:

25kg per box, packaging material: cardboard box

Preventive measures:

1. Ensure good ventilation during application, and keep the paint away from direct sunlight and heat sources.
2. To avoid skin and eye contact or inhalation of excessive paint fumes, please use protective equipment such as a face mask and gloves.
3. If it gets into your eyes, rinse immediately with plenty of water and seek medical attention.
4. Keep out of reach of children.

Product Warranty

1. If this series of products is applied to properly pre-treated aluminum extrusion profiles, it is guaranteed for ten to fifteen years, providing protection such as gloss retention and non-peeling.
2. This series of products complies with RoHS, REACH, and AAMA 2605 regulations.

Disclaimer:

* Before using this product, you must read and fully understand the instructions and precautions.