15kV American 600A T-type connector

Application areas:

The 15kV American 600A-T type connector is suitable for American 600A electrical systems and is widely used for high-voltage electrical connections in American-style transformer substations, ring main units, cable branch boxes, underground transformers, and other electrical equipment. It can be connected to 600A high-voltage bushings, multi-gang combination sockets, etc.

Product Description

Product Model: WABT 15/600

1. The product interface conforms to the IEEE 386 standard 600A bushing design;

2. The product is fully insulated, fully sealed, fully shielded, and compactly designed;

3. Test points can be equipped with live indicators or fault indicators to display the live and fault status of the equipment;

4. The inner and outer shield design of the shielded plug optimizes the electric field structure. The uniform outer shielding layer and grounding resistance of less than 1000Ω effectively keep the outer surface of the cable head at zero potential, ensuring the personal safety of maintenance operators.

5. The plug end is sealed with a cold shrink tubing between itself and the cable, which effectively solves the problem of moisture intrusion into the cable and is easy to install.

Product Parameters

15kV American 600A-T type plug structural dimensions

Electrical performance:

Rated voltage	15kV (8.3/14.4kV)
Rated current	600A
AC withstand voltage	42kV/1min 39 kV/5min
Partial discharge	15kV, ≤2pC
Impulse voltage (10 times each for positive and negative polarities)	95kV
Shielding resistor	≤5000Ω
Applicable cable cross-section	25-400mm2
Note: This product meets the requirements of IEC 60502.4-2005, IEEE-386 and GB/T 12706.4-2002.

Wolong Electric is committed to continuous product improvement, therefore we reserve the right to change designs, dimensions, and data without prior notice.

Product Selection