woer
AMS—Military Grade Heat Shrink Labeling Tube
AMS—Military Grade Heat Shrink Labeling Tube
Couldn't load pickup availability
Application areas:
Product Description
Designed specifically to meet the high surface requirements of wire and cable marking, it is made of radiation-crosslinked polyolefin. AMS provides permanent marking after direct printing, and the product maintains excellent character legibility even when exposed to corrosive cleaning agents and military fuel environments.
Heat shrink ratio: 2:1, 3:1
Initial shrinkage temperature: ≥ +85°C
Full shrinkage temperature: ≥ +135°C
Operating temperature: -55°C to +135°C
Highly flexible, lightweight, and flame-retardant.
Environmental Standards: RoHS
Standard colors: yellow, white (other colors can be customized)
Product Parameters
|
performance |
index |
Test methods |
|
Tensile strength |
≥10.3 MPa |
ISO 37 |
|
Elongation at break |
≥200% |
ISO 37 |
|
Tensile strength after aging |
≥6.9 MPa |
ISO 188 (175 ℃ × 168h) |
|
Elongation at break after aging |
≥100% |
ISO 188 (175 ℃ × 168h) |
|
Flame retardancy |
VW-1 |
UL224 |
|
Axial change rate |
2X: -10% to +1% , 3X: -15% to +5% |
UL224 (200 ℃ × 3 min) |
|
thermal shock |
No cracks, no drips |
UL224 (250 ℃ × 4h) |
|
Cold bending flexible |
No cracks |
UL224 (-55 ℃ ×1h) |
|
Water absorption rate |
< 0.5% |
ASTM D 570 |
|
Breakdown strength |
≥19.7 MV/m |
IEC 60243 |
|
Volume resistivity |
≥10 14 Ω·cm |
IEC 60093 |
Product Selection
M-2X (Double Uniform Wall Thickness) Specification Table
|
Serial Number |
Order Code |
Supply dimensions (mm) |
Fully shrunk dimensions (mm) |
|||
|
inner diameter |
Flattening width |
Double wall thickness |
Fully reduced inner diameter |
Single layer wall thickness |
||
|
1 |
AMS-M-2X-1.6- |
2.00±0.20 |
3.7±0.3 |
0.48±0.10 |
≤0.79 |
0.45±0.06 |
|
2 |
AMS-M-2X-2.4- |
2.79±0.20 |
5.0±0.3 |
0.48±0.10 |
≤1.18 |
0.49±0.06 |
|
3 |
AMS-M-2X-3.2- |
3.64±0.23 |
6.3±0.4 |
0.48±0.10 |
≤1.59 |
0.51±0.06 |
|
4 |
AMS-M-2X-4.8- |
5.26±0.25 |
8.9±0.4 |
0.49±0.10 |
≤2.36 |
0.54±0.06 |
|
5 |
AMS-M-2X-6.4- |
6.92±0.28 |
11.5±0.4 |
0.50±0.10 |
≤3.18 |
0.56±0.06 |
|
6 |
AMS-M-2X-9.5- |
10.2±0.32 |
16.7±0.5 |
0.51±0.11 |
≤4.75 |
0.59±0.06 |
|
7 |
AMS-M-2X-12.7- |
13.5±0.36 |
21.8±0.6 |
0.52±0.11 |
≤6.35 |
0.60±0.07 |
|
8 |
AMS-M-2X-19- |
20.1±0.40 |
32.2±0.6 |
0.53±0.11 |
≤9.53 |
0.62±0.07 |
|
9 |
AMS-M-2X-25- |
26.7±0.45 |
42.5±0.7 |
0.55±0.12 |
≤12.7 |
0.63±0.07 |
|
10 |
AMS-M-2X-38- |
39.8±0.51 |
63.2±0.8 |
0.57±0.12 |
≤19.1 |
0.64±0.07 |
|
11 |
AMS-M-2X-51- |
53.0±0.56 |
83.9±0.9 |
0.58±0.13 |
≤25.4 |
0.64±0.08 |
|
12 |
AMS-M-2X-76- |
79.4±0.56 |
125.3±1.0 |
0.59±0.13 |
≤38.1 |
0.64±0.09 |
M-3X (Three Times the Uniform Wall Thickness) Specification Table
|
Serial Number |
Order Code |
Supply dimensions (mm) |
Dimensions after full reduction (mm) |
|||
|
inner diameter |
Flattening width |
Double wall thickness |
Fully reduced inner diameter |
Single layer wall thickness |
||
|
1 |
AMS-M-3X-1.6- |
2.00±0.20 |
3.7±0.3 |
0.47±0.10 |
≤0.53 |
0.52±0.06 |
|
2 |
AMS-M-3X-2.4- |
2.79±0.20 |
5.0±0.3 |
0.47±0.10 |
≤0.79 |
0.57±0.06 |
|
3 |
AMS-M-3X-3.2- |
3.64±0.23 |
6.3±0.4 |
0.48±0.10 |
≤1.06 |
0.61±0.06 |
|
4 |
AMS-M-3X-4.8- |
5.26±0.25 |
8.9±0.4 |
0.49±0.10 |
≤1.59 |
0.67±0.06 |
|
5 |
AMS-M-3X-6.4- |
6.92±0.28 |
11.5±0.4 |
0.50±0.10 |
≤2.13 |
0.71±0.06 |
|
6 |
AMS-M-3X-9.5- |
10.2±0.32 |
16.7±0.5 |
0.52±0.11 |
≤3.18 |
0.77±0.06 |
|
7 |
AMS-M-3X-12.7- |
13.5±0.36 |
21.8±0.6 |
0.53±0.11 |
≤4.23 |
0.80±0.07 |
|
8 |
AMS-M-3X-19- |
20.1±0.40 |
32.2±0.6 |
0.55±0.11 |
≤6.35 |
0.84±0.07 |
|
9 |
AMS-M-3X-25- |
26.7±0.45 |
42.5±0.7 |
0.56±0.12 |
≤8.47 |
0.86±0.07 |
|
10 |
AMS-M-3X-38- |
39.8±0.51 |
63.2±0.8 |
0.57±0.12 |
≤12.9 |
0.89±0.07 |
|
11 |
AMS-M-3X-51- |
53.0±0.56 |
83.9±0.9 |
0.57±0.10 |
≤17.2 |
0.90±0.08 |
|
12 |
AMS-M-3X-76- |
79.4±0.56 |
125.3±1.0 |
0.57±0.13 |
≤25.8 |
0.92±0.09 |
dd
Share
