Multifunctional cement strengthening agent

Product Introduction:

NP-370P is an alkali-resistant acrylic resin with flexible yet resilient film-forming properties. It can be mixed with cement or used directly as a primer. When mixed with cement, this product can improve cement performance.

Product Uses:

1. Excellent penetration, the best primer application agent.
2. Suitable for tile bonding
3. Can repair and fill cracks in cement walls.
4. Can improve the waterproof properties of cured cement.
5. Primer for reinforcing the overlap between new and old cement.
6. Reduce the water consumption of cement mortar and improve the workability of cement.

Product performance:

1. It has a weakly alkaline pH value, does not corrode metals or other coatings, and exhibits good bonding strength with cement materials.
2. Can be applied in 3 coats for a simple and quick waterproofing effect, suitable for floors and walls.
3. It can also be mixed with other waterproof powders to form a thick-coat waterproof layer.
4. It can be used as a protective topcoat for other coatings, thereby achieving anti-chalking and anti-fading effects.

Product Information:

1. Color: Milky white liquid
2. Specific gravity: 1.0~1.1
3. VOC content: None
4. TVOC: None
5. Packaging: 20kg, 5kg/20L, 5L
6. Thinner: Water
7. Theoretical coating amount: Cement mortar: 4~5 kg/ ^m² /2mm; Primer: 0.3-0.4 kg/ ^m²
8. Film thickness: Primer: 10~30 μm
9. Curing time: Primer: 24 hours; Cement mortar: Approximately 168 hours to reach 80% strength.
10. Drying temperature: 25°C
11. Touch dry: Base coat: 1 hour or more; Cement mortar: >8 hours or more
12. Hardening and Drying: Primer: 24 hours; Cement mortar: Demolding possible after 72 hours, reaches 60% strength in approximately 168 hours. Application Interval: Primer: >8 hours; Cement mortar: Recommended 28 days or more.

Instructions for use:

1. Preparation before construction: The surface to be applied must be clean, dust-free, and free of loose material. It can also be applied in slightly damp conditions.
2. Application methods: Primer: brush, roll, spray; Cement mortar: trowel, comb trowel, or putty knife.
3. Dilution ratio: Base coat: 1 part water

Precautions:

1. This product can be wiped with a damp cloth while it is still wet.
2. Do not swallow. If accidentally swallowed, induce vomiting with plenty of water.
3. If the substance accidentally gets into the eyes, rinse the skin with water.
4. This product is for industrial use only.
5. Shelf life: Normally one year (should be stored in a cool place)
6. Avoid direct sunlight.
7. This product is a water-based adhesive and is non-flammable.

* Before using this product, you must read and fully understand the instructions for use and precautions.