900W CLEANTHANE 1000 Moisture-Curing Polyurethane Single-Compound Waterproof Primer

Product Introduction:

900W CLEANTHANE 1000 is a moisture-curing, one-component polyurethane primer that cures through a reaction with moisture in the air. This product is specifically designed for elastic polyurethane coating systems to strengthen the substrate surface and improve adhesion to intermediate coats, making it particularly suitable as a dedicated primer in waterproof coating projects.

characteristic:

1. Elastic polyurethane primer suitable for concrete and mortar surfaces.

2. Substrate preparation for waterproof coating systems on roofs, floors, or walls.

3. Exterior waterproofing of buildings, such as reinforcement of the substrate for balconies, parking lots, or pools.

4. Protective primer for industrial floors or bridge structures.

use:

Waterproofing materials for roofs and other parts of civil engineering and building structures

Product characteristics:

Specific gravity (g/ml) : 1 ± 0.05 (g/ml)

Volumetric solids (%) : 28 ± 3%

Color : Transparent

Recommended thinners: DR-700 , DR-700L , DR-790 (diluting is not recommended)

Flash point : 17 ℃

Drying time :

Min ( minutes ) , H ( hours ) , D (days)	5°C	20°C	30°C
Touch time	1H	30 Min	15 Min
Acupressure time	12H	4H	2H
Repaint interval ( lowest )	15 H	6H	3H
Longest interval between repaints	2D	1.5D	3H

Drying time will vary depending on the ambient temperature and humidity.

Theoretical coverage:

Typical: 0.13 kg/ ^m² /coat (dry film thickness: 50µm ( per coat ) )

The actual amount of paint applied will vary depending on factors such as the condition of the ground, the type of paint, the gloss, and the color.

construction:

Tools: Toothed scraper, rubber scraper, rake, roller

Dry film thickness: Adjustable as needed

Construction conditions: Concrete must be cured for at least 28 days in an environment with an air temperature of 21 degrees Celsius and a relative humidity of 50%.

Cleaning: After using all tools, please clean them thoroughly with the recommended thinner.

If dilution is required, please use the provided thinner.

For walls with different degrees of chalkiness, the dilution ratio can be adjusted appropriately according to their paint absorption capacity and the number of coats applied.

Instructions for use:

Surface treatment

Concrete needs to be cured for at least 28 days in an environment with an air temperature of 21 degrees Celsius and a relative humidity of 50%.

Before construction, moisture, grease, old or damaged coatings, and other contaminants must be removed from the surface.

If there are any cracks on the surface, please use 900W Cleanthane 1000 to add fiberglass repair.

For coarse cracks or fissures, as well as the junction of walls and floors, reinforce with 825W Cleanthane 2100 and grout ( 7:3).

Paint preparation

Stir well before use, and mix thoroughly with the hardener as recommended in the instructions.

Under normal circumstances, no thinner needs to be added (if necessary, a matching thinner can be added, but the amount added should be less than 5% ).

Storage:

Storage validity period: 12 months

This product must be stored in a cool, dry, and well-ventilated place, away from direct sunlight and fire.

Notes:

Please read the paint instructions carefully before application.

The paint should be thoroughly stirred after opening the can.

Strictly follow the dilution ratio specified in the instructions; do not dilute excessively.

Please mix the main agent and hardener thoroughly according to the proportions indicated in the instruction manual.

Any grease, moisture, or dust on the construction surface must be thoroughly cleaned, and the moisture content of the substrate must be less than 8%.

This product is flammable and should be kept away from heat sources and open flames.

The work area should be well-ventilated during construction, and workers should avoid contact with skin and eyes. Please refer to SDS for relevant information.

Do not use when the temperature is below 5 °C or the relative humidity exceeds 85%.

Unused main agent and hardener should be sealed separately and stored in a cool place.

Gray and light-colored products may fade or change color over time or during application due to exposure to ultraviolet radiation. This is a normal reaction and does not affect the quality or performance.

Painting system:

Painting system	Paint Name	Painting method	Number of paint coats
Waterproof primer	900W Cleanthane 1000	Scraping, rolling	1
Waterproof intermediate coating	825-Cleanthane 2100	Scraping, rolling	1
Waterproof topcoat	825-Cleanthane 3000K	Scraping, rolling	1

Packaging specifications:

Supporting specifications:

16.0

L

Safety Precautions:

1. Ensure good ventilation during application, and keep the paint away from direct sunlight and heat sources.
2. To avoid contact with skin and eyes or inhalation of excessive paint fumes, please use protective equipment such as a face mask and gloves.
3. If it gets into your eyes, rinse immediately with plenty of water and seek medical attention.

Disclaimer:

The above information represents typical properties, characteristics, and applications of the product and is intended as guidance only. It should not be considered a warranty, a statement requiring the company to assume legal liability, or a basis for presuming the company to be liable. Users are responsible for confirming the suitability of any batch of product for a specific purpose before using the information and content presented in this manual.