Water-based stone paint

Water-based stone paint

Product Introduction:

Stone-like paint is a thick-film building coating made primarily of polymer emulsion as the film-forming substance, combined with natural colored sand, additives, and other refined materials. Its finish closely resembles the texture of natural granite, marble, and other stone materials, providing a realistic stone-like effect. It is suitable for interior and exterior wall decoration of various buildings.

characteristic:

Realistic stone-like effect: Made with natural colored sand, the colors are natural and the texture is clear, presenting the luxurious texture of natural stone.

Excellent weather resistance: good resistance to ultraviolet rays and acid and alkali corrosion, maintains bright color for a long time, and is not easy to chalk or fade.

Adhesion: It has good adhesion to a variety of substrates (such as cement mortar, concrete, bricks, etc.) and is not easy to peel off.

Excellent water resistance: It has good resistance to water bleaching and water immersion, effectively protecting the walls.

Highly stain-resistant: The surface is dense and does not easily attract dust, making it easy to clean and maintain.

Easy to apply: Can be sprayed or troweled, flexible and efficient.

Safe and environmentally friendly: Water-based formula, non-toxic and odorless, meeting environmental protection requirements.

use:

Suitable for the decoration and protection of interior and exterior walls of various buildings such as residences, villas, hotels, office buildings, and schools, especially suitable for high-end venues that need to create a stone texture.

Product characteristics:

Resin type : Pure Acrylic Silicone Modified

Color: Please refer to our standard color chart for details.

Drying time :

Min ( minutes ) , H ( hours ) , D (days)	25°C
Touch time	12H
Acupressure time	48H
Repaint interval ( lowest )	24H

Drying time will vary depending on the ambient temperature and humidity.

Theoretical coverage:

Typical: 4.5-5.5 kg/m²

The actual amount of paint applied will vary depending on factors such as the condition of the wall, the type of paint, the gloss, and the color.

construction:

Tools: airless spray gun, paintbrush, roller

Dry film thickness: Adjustable as needed

Construction conditions: Construction should be carried out at a temperature above 5 ℃ and a relative humidity below 85%.

Cleaning: After using all tools, it is recommended to clean them with clean water.

If dilution is required, please use purified water.

For walls with different degrees of chalkiness, the dilution ratio can be adjusted appropriately according to their paint absorption capacity and the number of coats applied.

Surface treatment:

Before painting, the exterior wall surface must be firm, dry, clean, and free of dust and oil stains ( oil stains should be cleaned with solvent ) , moss, and dirt.

The following different methods can be used to handle the situation, depending on the circumstances:

New walls (unpainted)

Ensure the walls are completely dry; concrete and plaster walls should have sufficient curing time.

Wall humidity: The humidity of brick and mortar walls should be below 8%.

The pH value of cement walls, concrete, and cement mortar walls should be less than 10.

Please use appropriate tools to remove mortar residue and protrusions from the wall surface.

Fine grease and dust should be cleaned with a neutral detergent or solvent, or wiped with a damp cloth to thoroughly remove all stains.

For large cracks and dents on the wall surface, please repair with cement mortar; for small holes and cracks that cannot be filled smoothly with paint, use putty to repair them (try to repair only the affected areas). After using repair materials, the wall must be completely dry and sanded smooth before continuing construction.

Old wall (already painted)

If the original paint layer is intact and adheres well to the wall, you can continue applying the paint. However, if the paint becomes chalky, you can lightly sand it with sandpaper or remove the chalky layer with a low-pressure water gun. The wall must be completely dry and sanded smooth before continuing the application.

If the old paint film is partially damaged, use appropriate tools to remove the damaged paint film down to the edge of the still-firm part, and repair it smoothly before continuing the work.

Construction method:

1. Please read the paint instructions carefully before application.
2. The paint should be thoroughly stirred after opening the can.
3. Strictly follow the dilution ratio specified in the instruction manual; do not over-dilute.
4. Depending on the different application tools, adhere to the recoating intervals and coating thicknesses specified in the instruction manual to ensure coating quality.
5. Avoid applying excessive paint to the brush or roller during application.
6. Tools should be cleaned immediately after construction.
7. Do not pour diluted paint back into the original packaging.

Storage:

Store in a cool, clean, and dry place between 5 °C and 35 °C. Unused paint should be sealed tightly. Adding impurities will cause the paint to deteriorate. If unopened and properly stored, the product has a shelf life of over 2 years.

Packaging specifications:

Supporting specifications:

25.0

Kg

Safety Precautions:

1. Ensure good ventilation during application, and keep the paint away from direct sunlight and heat sources.
2. To avoid contact with skin and eyes or inhalation of excessive paint fumes, please use protective equipment such as a face mask and gloves.
3. If it gets into your eyes, rinse immediately with plenty of water and seek medical attention.

Disclaimer:

The above information represents typical properties, characteristics, and applications of the product and is intended as guidance only. It should not be considered a warranty, a statement requiring the company to assume legal liability, or a basis for presuming the company to be liable. Users are responsible for confirming the suitability of any batch of product for a specific purpose before using the information and content presented in this manual.