Solvent-free acid-resistant floor coating

933 Solvent-free Acid-resistant Floor Coating

Product Introduction:

Our solvent-free acid-resistant floor coating is a high-performance floor coating developed to cope with harsh chemical environments. It uses an advanced 100% solids epoxy resin formula, completely free of any volatile organic compounds (VOCs), making it not only environmentally friendly but also significantly reducing the harm to human health during construction. This product is specifically enhanced for acid and alkali resistance and corrosion resistance, providing a strong and durable protective barrier for floors in highly acidic and alkaline environments such as chemical plants and laboratories. Its thick-coat design gives the paint film excellent abrasion resistance and impact resistance, effectively extending the service life of the floor.

characteristic:

1. Excellent chemical resistance: It can effectively resist the erosion of various acids, alkalis, salts and other corrosive chemicals, protecting the ground structure from damage.

2. Environmentally friendly and non-toxic: The 100% solid formula does not release any solvents or harmful gases during construction, complying with environmental regulations and protecting the health of construction workers and users.

3. High hardness and wear resistance: The paint film is hard and wear-resistant, and can withstand frequent vehicle traffic and heavy loads, and is not easily scratched or worn.

4. Excellent adhesion: It has excellent adhesion to substrates such as cement and metal, and is not easy to delaminate or peel off, ensuring the integrity of the coating.

5. Excellent impermeability: The dense paint film structure effectively prevents liquid penetration and prevents chemical contamination of the ground surface.

6. Easy to clean and maintain: The surface is smooth and does not easily trap dirt, making daily cleaning very simple.

use:

1. Chemical plants and production workshops: Resisting the spillage and corrosion of various chemical agents.

2. Laboratory: Protect the floor from laboratory reagents.

3. Electroplating plants and battery manufacturers: Must be able to handle corrosive solutions such as strong acids and strong alkalis.

4. Food processing plants and beverage factories: Resistant to the corrosion of cleaning agents and disinfectants, while meeting hygiene requirements.

5. Pharmaceutical and pharmaceutical plants: Provide clean, corrosion-resistant flooring environments.

6. Electronics factories: To prevent chemical solvents from damaging the ground.

Product characteristics:

Viscosity: 130 ± 5 KU (25℃)

Specific gravity (g/ml): 1.52 ± 0.05 (g/ml)

Volumetric solids (%): 99 ± 1%

Color: Please refer to our standard color chart for details.

Hardener ratio: A : B = 4 : 1 (by weight)

Recommended number of coats: 1

Drying time:

Min (minutes), H (hours), D (days)	30℃
Touch time	12H
Hardening time	5D
Repaint interval (lowest)	1D
Recoat interval (max)	2D
Usable time	30min

Drying time will vary depending on the ambient temperature and humidity.

Theoretical coverage:

Typical: 0.99 m²/L/coat (dry film thickness: 1000 μm (per coat))

The actual amount of paint applied will vary depending on factors such as the condition of the ground, the type of paint, the gloss, and the color.

Instructions for use:

Surface treatment

The surface to be worked on must be flat and dry.

Before construction, moisture, grease, old or damaged coatings, and other contaminants must be removed from the surface.

Paint preparation

Stir well before use, and mix thoroughly with the hardener as recommended in the instructions.

Under normal circumstances, no thinner needs to be added (if necessary, a matching thinner can be added, but the amount added should be less than 5%).

Storage:

Storage validity period: 12 months

This product must be stored in a cool, dry, and well-ventilated place, away from direct sunlight and fire.

Notes:

Please read the paint instructions carefully before application.

The paint should be thoroughly stirred after opening the can.

Strictly follow the dilution ratio specified in the instructions; do not dilute excessively.

Please mix the main agent and hardener thoroughly according to the proportions indicated in the instruction manual.

Any grease, moisture, or dust on the construction surface must be thoroughly cleaned, and the moisture content of the substrate must be less than 8%.

This product is flammable and should be kept away from heat sources and open flames.

The work area should be well-ventilated during construction, and workers should avoid contact with skin and eyes. Please refer to SDS for relevant information.

Do not use when the temperature is below 5°C or the relative humidity exceeds 85%.

Unused main agent and hardener should be sealed separately and stored in a cool place.

Epoxy floor coatings may fade or change color under sunlight, which is a normal reaction and does not affect their quality or performance.

Packaging specifications:

Supporting specifications:

18.0

L

Safety Precautions:

1. Ensure good ventilation during application, and keep the paint away from direct sunlight and heat sources.
2. To avoid skin and eye contact or inhalation of excessive paint fumes, please use protective equipment such as a face mask and gloves.
3. If it gets into your eyes, rinse immediately with plenty of water and seek medical attention.
4. Keep out of reach of children.

Disclaimer:

The above information represents typical properties, characteristics, and applications of the product and is intended only as guidance from our company. It should not be considered a warranty, a statement requiring the company to assume legal liability, or a basis for presuming the company to be liable. Users are responsible for confirming the suitability of any batch of product for a specific application before using the information and content presented in this manual.