Water transfer printing primer baking paint

Product Introduction:

This product is made with special acrylic resin and high-grade pigments and fillers. Combined with a yellowing-resistant curing agent, it forms a special primer for water transfer printing after application, providing excellent interlayer adhesion for water transfer printing materials.

characteristic:

1. It has an excellent paint film appearance.
2. High coverage
3. Interlayer attachment
4. Dry quickly

use:

- Widely used as a water transfer primer for ABS and other organic materials

Physical properties:

1. Color: White, light gray
2. Density (g/ml): 1.40 ± 0.05
3. Volumetric solids content (%): 48 ± 1
4. Flash point (°C): 24
5. Mixing ratio (by weight): 10:1

Drying time:

Theoretical coverage:

1. Theoretical coverage: 8.5 m²/kg/coating with a dry film thickness of 40 μm and a wet film thickness of 80 μm.
2. The dilution ratio can be adjusted according to surface conditions, environment, film thickness, and coating method.

Surface treatment:

1. The substrate must be clean and dry, free of any visible surface contaminants.
2. If necessary, use ethanol solvent to clean oil stains from the surface.

Construction conditions:

1. The ambient temperature during construction must not exceed 35°C, and the relative humidity must be less than 80%.
2. The construction area must be well-ventilated and explosion-proof.

Application conditions:

1. Specialized spraying machinery:
2. Pressure spray: Air spray is recommended.

Instructional Purpose:

1. Stir well before use.
2. Thinner: D1111
3. Dilute 20-25% depending on the required film thickness and application.
4. After using the paint tools, clean them with thinner.

Painting system:

custody:

1. Store in a cool, dry, well-ventilated place, away from heat sources and direct sunlight. Keep the container upright and tighten the lid.
2. At least 12 months

Packaging specifications:

Bucket: 22kg
The volume may be affected by slight differences in color and raw material density.

Safety precautions:

- Material safety information is provided in the MSDS. Avoid inhalation of spray or vapors. Avoid skin and eye contact. If skin contact occurs, rinse immediately with water or a suitable detergent. If eye contact occurs, rinse with water and seek medical attention immediately. As this product contains flammable solvents, keep away from sparks and open flames. The use and handling of this product should comply with relevant national regulations.

Disclaimer:

- Disclaimer: The information and specifications provided in this manual are based on the company's specifications. If the usage conditions exceed the company's specifications, they are not covered under warranty. The company reserves the right to modify the data.