American 600A T-II type plug

Application areas:

Suitable for American 600A electrical systems, used for high-voltage electrical connections in American-style transformer substations, ring main units, cable branch boxes, and other electrical equipment, and installed on American 600A bushing interfaces.

Product Description

Product Model: WABT2-15/600

The American 600A T-II type plug consists of an adapter and an American T-type plug, suitable for American 600A electrical systems. It is used for high-voltage electrical connections in American-style transformer substations, ring main units, cable branch boxes, and other electrical equipment. It allows for the transition from a 600A rated current interface to a 200A rated current interface, providing users with a 200A outgoing interface. The 200A interface can accommodate American elbow plugs, American elbow surge arresters, and 200A insulating caps.

The product interface conforms to the IEEE 386 standard for 600A and 200A bushing designs.

The product features full insulation, full sealing, full shielding, and a compact design.

Test points can be equipped with live indicators or fault indicators to display the live and fault status of the equipment;

The inner and outer shield design of the shielded plug optimizes the electric field structure. The uniform outer shielding layer and grounding resistance of less than 1000Ω effectively keep the outer surface of the cable head at zero potential, ensuring the personal safety of maintenance operators.

The plug end is sealed with a cold shrink tubing between itself and the cable, effectively solving the problem of moisture intrusion into the cable, and it is easy to install.

Product Parameters

Electrical performance:

Rated voltage	15kV (8.3/14.4kV)
Rated current	600A
AC withstand voltage	42kV/1min 39 kV/5min
Partial discharge	15kV, ≤2pC
Impulse voltage (10 times each for positive and negative polarities)	95kV
Shielding resistor	≤5000Ω
Applicable cable cross-section	25-400mm2
Note: This product meets the requirements of IEC 60502.4-2005, IEEE-386 and GB/T 12706.4-2002.

Wolong Electric is committed to continuous product improvement, therefore we reserve the right to change designs, dimensions, and data without prior notice.

Product Selection