European 250A Detachable Connector

Application areas:

The European 250A detachable connector is used for incoming and outgoing line positions in electrical equipment of 24kV and below. It is compatible with TYPE "A" bushings conforming to EN 50180 & EN 50181 standards, with a rated current of 250A. It provides full insulation to the bushing and cable, and features shielded, touch-sensitive connection.

Product Description

European 250A detachable connector, including:

1. WEZT 15/250 European 250A elbow plug; WEZT 24/250 European 250A elbow plug;

2. WEZC 15/250 European 250A straight plug; WEZC 24/250 European 250A straight plug;

3. The European 250A detachable connector is suitable for the incoming and outgoing line terminals of (cross-linked power cables) in ring network switchgear, connecting to the type A bushings of the switchgear's incoming and outgoing lines. It provides a fully insulated, fully sealed connection for power cables to switchgear or cable branch boxes.

4. The European 250A elbow plug is used for conduit and cable with a 90-degree bend at the exit point; the European 250A straight plug is used for conduit and cable with a straight exit point.

Product Parameters

Electrical performance of front and rear plugs

Rated voltage	15kV	24kV
Applicable sleeve type (front insertion)	Type A	Type A
AC withstand voltage	39kV/5min	54kV/5min
Partial discharge	15kV, ≤5pC	20kV, ≤5pC
Impulse voltage (10 times each for positive and negative polarities)	95V	125kV
Shielding resistor	≤5000Ω	≤5000Ω
Applicable cable cross-section	25-120mm²	25-120mm²
Note: This product meets the requirements of IEC 60502.4 and GB/T 12706.4.

Wolong Electric is committed to continuous product improvement, therefore we reserve the right to change designs, dimensions, and data without prior notice.

Product Selection