woer
RSFR-(2X)150H - Halogen-free, environmentally friendly, high-temperature resistant, flame-retardant heat shrink tubing
RSFR-(2X)150H - Halogen-free, environmentally friendly, high-temperature resistant, flame-retardant heat shrink tubing
Couldn't load pickup availability
Application areas:
It is widely used in electronics, communications, automobiles, ships, aircraft manufacturing and other fields, and is especially suitable for household electronic aroma diffusers, induction cookers, rice cookers, microwave ovens, ovens and so on.
Product Description
Product Introduction:
Halogen-free, high-temperature resistant, and flame-retardant heat shrink tubing is made of radiation-crosslinked polyolefin material. It is flame-retardant, environmentally friendly, high-temperature resistant, halogen-free, antimony-free, and has excellent physical, chemical, and electrical properties. Its main functions are electrical insulation of connectors in high-temperature environments, rust and corrosion prevention of solder joints, mechanical protection, and wire harness protection. It is widely used in electronics, communications, automobiles, ships, aircraft manufacturing, and other fields, and is especially suitable for household electronic aroma diffusers, induction cookers, rice cookers, microwave ovens, ovens, etc.
Features:
Compliance standards: UL224 , CAN/CSA C22.2 NO198.1-99 , AMS-DTL-23053/5 Class 1
Heat shrink ratio: 2:1
Initial shrinkage temperature: ≥+84 ℃
Complete shrinkage temperature: ≥+135 ℃
Operating temperature: -55 ℃ ~ +150 ℃
Halogen -free, antimony-free, low smoke, non-toxic, flexible, and flame-retardant.
Environmental standards: RoHS , SONY -SS 00259
Standard colors: black , red, green, blue, and other international standard colors.
Product Parameters
|
performance |
index |
Test methods |
|
Tensile strength |
≥10.4 MPa |
ASTM D 2671 |
|
Elongation at break |
≥200% |
ASTM D 2671 |
|
Tensile strength after aging |
≥7.3 MPa |
1 80 ℃ × 168h |
|
Elongation at break after aging |
≥100% |
1 80 ℃ × 168h |
|
Axial change rate |
-5% ~ +5% |
ASTM D 2671 |
|
Flame retardancy |
VW-1 |
ASTM D 2671 C method |
|
Withstand voltage (600V) |
2500 V , no breakdown in 1 minute |
UL224 |
|
thermal shock |
No cracks, no dripping |
UL224 (250 ℃ × 4h) |
|
Breakdown strength |
≥15 kV/mm |
ASTM D 149 |
|
Volume resistivity |
≥10 14 Ω·cm |
IEC 60093 |
Product Selection
|
Imperial Standard (inch) |
Specification |
Supply inner diameter (mm) |
Fully shrunk dimensions (mm) |
Standard packaging Rice / plate |
Scope of application (mm) |
||
|
inner diameter |
Wall thickness |
||||||
|
*Φ0.6/0.35 |
≥0.90 |
≤0.35 |
≥0.33 |
200 |
0.5~0.7 |
||
|
3/64 |
*Φ0.8/0.40 |
≥1.00 |
≤0.40 |
≥0.33 |
200 |
0.6~0.9 |
|
|
1/16 |
*Φ1.0/0.65 |
≥1.60 |
≤0.65 |
≥0.33 |
200 |
0.8~1.2 |
|
|
*Φ1.5/0.85 |
≥2.00 |
≤0.85 |
≥0.36 |
200 |
1.0~1.6 |
||
|
3/32 |
*Φ2.0/1.00 |
≥2.50 |
≤1.00 |
≥0.44 |
200 |
1.1~1.2 |
|
|
*Φ2.5/1.25 |
≥3.00 |
≤1.25 |
≥0.44 |
200 |
1.4~2.6 |
||
|
1/8 |
*Φ3.0/1.50 |
≥3.50 |
≤1.50 |
≥0.44 |
200 |
1.7~2.2 |
|
|
*Φ3.5/1.75 |
≥4.00 |
≤1.75 |
≥0.44 |
200 |
2.0~3.6 |
||
|
*Φ4.0/2.00 |
≥4.50 |
≤2.00 |
≥0.44 |
200 |
2.2~4.3 |
||
|
*Φ4.5/2.25 |
≥4.80 |
≤2.25 |
≥0.44 |
100 |
2.5~4.6 |
||
|
*Φ5.0/2.50 |
≥5.30 |
≤2.50 |
≥0.56 |
100 |
2.7~5.1 |
||
|
*Φ6.0/3.00 |
≥6.40 |
≤3.00 |
≥0.56 |
100 |
3.2~6.1 |
||
|
*Φ7.0/3.50 |
≥7.40 |
≤3.50 |
≥0.56 |
100 |
3.7~7.1 |
||
|
*Φ8.0/4.00 |
≥8.40 |
≤4.00 |
≥0.56 |
100 |
4.2~8.1 |
||
|
3/8 |
*Φ9.0/4.50 |
≥9.30 |
≤4.50 |
≥0.56 |
100 |
4.7~9.1 |
|
|
*Φ10/5.00 |
≥10.3 |
≤5.00 |
≥0.56 |
100 |
5.3~10.1 |
||
|
*Φ11/5.50 |
≥11.3 |
≤5.50 |
≥0.56 |
100 |
5.8~11.1 |
||
|
1/2 |
*Φ12/6.00 |
≥12.3 |
≤6.00 |
≥0.56 |
100 |
6.3~12.1 |
|
|
*Φ13/6.50 |
≥13.4 |
≤6.50 |
≥0.69 |
100 |
6.8~13.1 |
||
|
*Φ14/7.00 |
≥14.4 |
≤7.00 |
≥0.69 |
100 |
7.3~14.1 |
||
|
*Φ15/7.50 |
≥15.5 |
≤7.50 |
≥0.69 |
100 |
7.8~15.1 |
||
|
*Φ16/8.00 |
≥16.5 |
≤8.00 |
≥0.69 |
100 |
8.3~16.1 |
||
|
*Φ17/8.50 |
≥17.5 |
≤8.5 |
≥0.69 |
100 |
8.8~17.1 |
||
|
3/4 |
*Φ18/9.00 |
≥18.9 |
≤9.00 |
≥0.69 |
100 |
9.3~18.1 |
|
|
*Φ20/10.0 |
≥21.5 |
≤10.0 |
≥0.77 |
100 |
10.5~21.0 |
||
|
*Φ22/11.0 |
≥23.4 |
≤11.0 |
≥0.77 |
100 |
11.5~23.0 |
||
|
1 |
*Φ25/12.5 |
≥25.6 |
≤12.5 |
≥0.77 |
50 |
13.0~25.0 |
|
|
*Φ28/14.0 |
≥29.0 |
≤14.0 |
≥0.87 |
50 |
14.5~27.0 |
||
|
*Φ30/15.0 |
≥31.5 |
≤15.0 |
≥0.87 |
50 |
17.0~29.0 |
||
|
*Φ35/17.5 |
≥36.5 |
≤17.5 |
≥0.87 |
50 |
20.0~30.0 |
||
|
1-1/2 |
*Φ40/20.0 |
≥41.5 |
≤20.0 |
≥0.87 |
50 |
22.0~35.0 |
|
|
2 |
*Φ50/25.0 |
≥51.5 |
≤25.0 |
≥0.97 |
25 |
30~45 |
|
|
*Φ60/30.0 |
≥60.0 |
≤30.0 |
≥1.07 |
25 |
35~50 |
||
|
3 |
*Φ70/35.0 |
≥70.0 |
≤35.0 |
≥1.17 |
25 |
40~60 |
|
|
*Φ80/40.0 |
≥80.0 |
≤40.0 |
≥1.17 |
25 |
45~70 |
||
|
4 |
*Φ100/50.0 |
≥100.0 |
≤50.0 |
≥1.17 |
25 |
55~85 |
|
|
5 |
*Φ120/60.0 |
≥120.0 |
≤60.0 |
≥1.17 |
25 |
65~100 |
|
|
6 |
*Φ150/70.0 |
≥150.0 |
≤70.0 |
≥1.17 |
25 |
80~120 |
|
Note: * This is a non-standard sleeve, manufactured according to order requirements.
Share
